Tauira | SG-PTZ2042NL-LR8 | ||||
Pūoko | Pūoko Whakaahua | 1/2.8” Sony Starvis karapa whakamua CMOS | |||
Pika whai hua | Approx.2.13 Megapixel | ||||
Arotahi | Roa Arotahi | 7mm~300mm, 42x Topa Optical | |||
Aperture | F1.6~F6.0 | ||||
Marae Tirohanga | H: 43.3°~1.0°, V:25.2°~0.6°, D: 49.0°~1.2° | ||||
Kati Arotahi Tawhiti | 0.1m~1.5m (Where~Waea) | ||||
Tere Topa | Approx.6s (Whanui Waea~Waea) | ||||
Tawhiti DORI(Tangata) | Rapu | Matakitaki | Te mohio | Tautuhia | |
4,400m | 1,746m | 880m | 440m | ||
Ataata | Kōpeketanga | H.265/H.264/H.264H/MJPEG | |||
Te kaha rerema | 3 awa | ||||
Whakatau | 50Hz: 25fps@2MP(1920×1080), 25fps@1MP(1280×720)60Hz: 30fps@2MP(1920×1080), 30fps@1MP(1280×720) | ||||
Auau Moka Ataata | 32kbps~16Mbps | ||||
Ororongo | AAC / MP2L2 | ||||
Whatunga | Rokiroki | Kaari TF (256 GB), FTP, NAS | |||
Kawa Whatunga | Onvif, HTTP, HTTPS, IPv4, IPv6, RTSP, DDNS, RTP, TCP, UDP | ||||
Whakamaamaha | Tautoko | ||||
Nga Takahanga Whanui | Motini, Tamper, Kaari SD, Whatunga | ||||
IVS | Waea Takirua, Te Rapu Taiapa Ripeka, Te Momomoana, Te Mea Kua Whakarerea, Te Neke Tere, Te Rapu Waka, Te Whakataunga Huihuinga, Te Mea Ngaro, Te Rapu Hurihuri. | ||||
Tauwehenga S/N | ≥55dB (AGC Weto, Taumaha ON) | ||||
Whakamaramatanga iti | Tae: 0.005Lux / F1.6;B/W: 0.0005Lux/F1.6 | ||||
Whakaiti Haruru | 2D/3D | ||||
Aratau Whakaaturanga | Aunoa, Aperture Priority, Shutter Priority, Gain Priority, Manual | ||||
Kapeneheihana Whakaaturanga | Tautoko | ||||
Tere Tere | 1/1~1/30000s | ||||
BLC | Tautoko | ||||
HLC | Tautoko | ||||
WDR | Tautoko | ||||
White Balance | Aunoa, A-ringa, Roto, Waho, ATW, rama konutai, rama tiriti, Maori, Kotahi Pana | ||||
Ra/Po | Hiko, ICR(Aunoa/A-ringa) | ||||
Aratau Arotahi | Aunoa, Manual, Semi Aunoa, Tere Aunoa, Tere Semi Aunoa, Kotahi Pana AF | ||||
Kohu Hiko | Tautoko | ||||
Pore | Tautoko | ||||
EIS | Tautoko | ||||
Topa Mamati | 16x | ||||
Tawhiti IR | Tae atu ki te 1000m | ||||
IR On/OFF Mana | Aunoa/A-ringa | ||||
IR LED | Kōwae Taiaho | ||||
Wiper | N/A | ||||
PTZ | Rauemi | Hoahoa hanganga whakauru, Anga Aluminium-Alloy | |||
Aratau taraiwa | Turbine Worm Drive | ||||
Parenga-Whakaweto | Tautoko | ||||
Awhe Pan/Tilt | Pan: 360°, Mutunga;Hunga: -84°~84° | ||||
Tere Pan/Tongo | Ka taea te whakarite, paraharaha: 0°~60°/s;Hunga: 0°~40°/s; | ||||
Haereere | 4 | ||||
Tatūkē | 128 | ||||
Kawa | Pelco-P/D | ||||
Tūhono Hoia | Tautoko | ||||
Itarangi | RJ-45 (10Turanga-T/100Turanga-TX) | ||||
RS485 | 1 | ||||
Ororongo I/O | 1/1 | ||||
Whakaoho I/O | 1/1 | ||||
Tauera | 5m ma te taunoa (me te 2m te wahanga Tiaki Porowhita) | ||||
Tuku Hiko | DC24~36V±15% / AC24V | ||||
Whakamahi Hiko | 50W | ||||
Nga Tikanga Mahi | -30°C~+60°C/20% ki te 80%RH | ||||
Taumata Tiaki | IP66;TVS 4000V Tiaki Uira, aukati ngaru | ||||
Kohanga | Te whakarewa | ||||
Tae | Ma te taunoa (pango Kōwhiringa) | ||||
Ahu(L*W*H) | Approx.260mm * 387mm * 265mm | ||||
Taumaha Kupenga | 8.8kg | ||||
Taumaha Kere | 16.7kg |